CNC Turning & Milling Solutions for Automotive Components
High-productivity turning and milling solutions for shafts, connectors, transmission parts, sensor housings, and precision automotive components.
Automotive Parts CNC Machining
• Mass Production
• High Consistency Requirement
• Multi-process Composite Machining
• High Demand for Automation Integration
• Strict Dimensional Tolerance Control
DIMENSION DRAWING
Dimension | mm | Dimension | mm |
A | 20.00 | F (Center Distance) | 24.00 |
B | 20.00 | G (Width Inside) | 20.00 |
C | 30.00 | Thread (Top Hole) | M8 x 1.25 |
L | 50.00 | Material | Carbon Steel |
∅D (Clevis Hole) | 12.00 | Surface Finish | Machined |
∅E (Pin Hole) | 12.00 | Tolerance | ±0.10 mm |
RECOMMENDED MACHINEFOR
LHSK52DY-450L
90° L-Type CNC Turning Center + Tailstock
✔ 40% Shorter Cycle Time
✔ 50% Lower Labor Cost
✔ Improved Machining Precision
✔ Uninterrupted Automatic Production
SIMULATED MACHINING PROCESS
90° L-Type CNC Turning Center + Tailstock
Send Your Automotive Part Drawing for a Free Machining Evaluation
Upload your automotive component drawing and our engineering team will provide:
• Recommended machine configuration
• Estimated cycle time
• Automation proposal
• Productivity improvement analysis
Within 24 hours.
Address: 1st Floor, Building 9, No. 80 Hongqi Middle Road, Hongqi Community, Ronggui Street, Shunde District, Foshan City, Guangdong Province, China
SOCIAL MEDIA
Mobile brochure
SOCIAL MEDIA
Copyright © 2026 Guangdong Lihao CNC Technology Co., Ltd.
English
中文
LIHAO
LIHAO